Collection of scientific papers "Theoretical and applied mechanics"
included in the List of scientific publications of the Republic of Belarus for publishing the results of dissertation research in the following branches of science (scientific areas):
• technical
engineering,
building;
• physical and mathematical
biomechanics,
mechanics of a deformable solid body.
The publication frequency is once a year.
Contact Information
Address: Minsk, 220013,
65 Nezavisimosti avenue, building 1, room 20, 418
Phone: (+375 17) 293 92 36, (+375 17) 292 02 04
e-mail: tmech@bntu.by
Editorial team
Chief Editor
Vasilevich Yury Vladimirovich, Doctor of Physical and Mathematical Sciences, Professor, Head of the Department of Theoretical Mechanics and Mechanics of Materials, Faculty of Mechanical Engineering, Belarusian National Technical University (Minsk, Belarus)
Deputy Chief Editor
Zhuravkov Mikhail Anatolyevich, Doctor of Physical and Mathematical Sciences, Professor, Head of the Department of Theoretical and Applied Mechanics, Belarusian State University (Minsk, Belarus)
Bosakov Sergey Viktorovich , Doctor of Technical Sciences, Professor of the Department of Mathematical Methods in Construction of the Belarusian National Technical University (Minsk, Belarus)
Gachkevich Alexander Romanovich , Doctor of Physical and Mathematical Sciences, Professor, Head of the Department of Theory of Physical and Mechanical Fields of the Institute of Applied Problems of Mechanics and Mathematics named after A.I. Ya. S. Podstrigach" National Academy of Sciences of Ukraine (Ukraine)
Dudyak Alexander Ivanovich , Doctor of Technical Sciences, Associate Professor, Professor of the Department of Theoretical Mechanics and Mechanics of Materials, Belarusian State University (Minsk, Belarus)
Zhuk Yaroslav Aleksandrovich , Doctor of Physical and Mathematical Sciences, Professor, Head of the Department of Theoretical and Applied Mechanics, Taras Shevchenko National University of Kyiv (Ukraine)
Kazaryan Karen Bagratovich , Doctor of Physical and Mathematical Sciences, Professor, Chief Researcher of the Department of Problems of the Dynamics of Interaction of Deformable Media of the Institute of Mechanics of the Academy of Sciences (Armenia)
Kulikov Ivan Semenovich , Doctor of Physical and Mathematical Sciences, Professor of the Department of Technical Maintenance of Aircraft and Engines of the Belarusian State Aviation Academy (Minsk, Belarus)
Mozharovsky Valentin Vasilyevich , Doctor of Technical Sciences, Professor of the Department of Computational Mathematics and Programming, Gomel State University named after F. Skorina (Gomel, Belarus)
Sulim Georgiy Teodorovich , Doctor of Physical and Mathematical Sciences, Professor, Head of the Department of Mechanics, Lviv National University. Ivan Franka (Ukraine)
Trepachko Viktor Mikhailovich , Candidate of Technical Sciences, Associate Professor, Director of the branch of the Belarusian National Technical University "Research Polytechnic Institute" (Minsk, Belarus)
Kharitonchik Sergei Vasilyevich , Doctor of Technical Sciences, Associate Professor, Rector of the Belarusian National Technical University (Minsk, Belarus)
Chizhik Sergey Antonovich , Doctor of Technical Sciences, Professor, Academician of the National Academy of Sciences of Belarus, First Deputy Chairman of the Presidium of the National Academy of Sciences of Belarus (Minsk, Belarus)
Shcherbakov Sergey Sergeevich , Doctor of Physical and Mathematical Sciences, Professor, Deputy Chairman of the State Committee for Science and Technology of the Republic of Belarus (Minsk, Belarus)
Executive Secretary
Chigarev Vitaly Anatolyevich, Candidate of Physical and Mathematical Sciences, Associate Professor of the Department of Theoretical Mechanics and Mechanics of Materials, Belarusian National Technical University (Minsk, Belarus)
For authors
Rules for the design of articles
The design of the article must meet the following requirements:
Fields. Top - 25 mm, bottom - 25 mm, left - 30 mm, right - 20 mm.
Volume of articles. Should not The design of the article must meet the following requirements:
Format. Microsoft Word document, A4 (210x297mm).
Fields. Top - 20 mm, bottom - 25 mm, left - 25 mm, right - 25 mm.
Volume of articles. Should not exceed 8 pages (at least 14 thousand printed characters). The structure of the article may include sections.
UDC, Title, Author(s). First, the publication index according to the universal decimal classification (UDC) is indicated in the upper left corner of the sheet. Then the title of the report is indicated (in capital letters, bold, text alignment in the center, 12 pt), then the names and initials of the authors (bold font, text alignment in the center, 12 pt). After - the name of the institution, organization (text alignment in the center, italics, 12 pt).
Аннотация. Объем 50-100 слов. Набор текста: шрифт Times New Roman 12 пт, курсив, межстрочный интервал одинарный. Абзац 1 см.
Основной текст. Шрифт Times New Roman, размер 12 пт. Межстрочный интервал одинарный, абзац 1 см. Автоматическая расстановка переносов. Выравнивание текста по ширине. Страницы не нумеруются.
Формулы. Формулы набираются при помощи программного обеспечения MathType или в программе Microsoft Equation, входящей в состав MS Word, таким же шрифтом и размером, что и основной текст статьи. Дополнительный межстрочный интервал перед строкой формул составляет 6 пт. Формулы располагаются по центру страницы. Нумерация формул в статье сквозная. Нумеруются формулы арабскими цифрами в скобках по правому краю страницы.
Буквенные обозначения в тексте. Шрифт для греческих букв – Symbol, для всех остальных – Times New Roman, основной размер – 11, крупный индекс – 7, мелкий – 5. В обозначениях латинские буквы набираются курсивом, греческие и русские – прямо. В математических формулах следует избегать громоздких обозначений.
Размерность всех физических величин должна соответствовать Международной системе единиц измерений (СИ).
Принятые обозначения расшифровываются непосредственно в тексте статьи.
Таблицы. Располагаются после первого упоминания о них в тексте. Заголовки таблиц располагаются строго по центру. Табличные данные - или по центру, или выравниваются по левому краю (шрифт Times New Roman 12 пт, начертание обычное).
Иллюстрации. Располагаются после первого упоминания о них в тексте. Каждая иллюстрация должна иметь подрисуночную подпись (шрифт Times New Roman 12 пт). Рисунки выполняются во встроенном графическом редакторе MS Word. Графики и диаграммы представляются как рисунки, выполняются в графическом редакторе, совместимом с MS Word. Фотографии и рисунки должны иметь контрастное черно-белое изображение.
Литература. Приводится в конце статьи. Список литературы должен быть составлен в порядке появления ссылок в тексте, которые помещаются в квадратные скобки, например: [1, с. 12] или [1]. Сведения об источниках, включенных в список, необходимо давать в соответствии с требованиями ГОСТ 7.1-03 с обязательным приведением названий работ. Шрифт Times New Roman 10 пт, обычный. Нумерация списка автоматическая, без абзаца.
Summary. At the end of the article, "SUMMARY" in Russian and "SUMMARY" (no more than 75 words in English) are printed with 1 interval. Also attached is a translation into English of the names of the authors and the title of the article, report and abstract.
Articles that have not passed the examination of design are not accepted for further consideration.
Articles in Russian, Belarusian and English are accepted for publication.
The originality of the text must be at least 70% of the volume of the article (the article is checked for anti-plagiarism).
The article must contain the following elements:
Articles sent to the editors of the collection are necessarily checked for compliance with the formatting rules stated earlier. Examination of the article for compliance with the rules of registration is carried out by the executive secretary of the collection within a week. In case of a positive examination, the article is submitted to the editorial board for subsequent review.
The procedure for accepting articles
The collection "Theoretical and Applied Mechanics" accepts articles, the authors of which are teachers (assistants, teachers, associate professors, professors), graduate students, applicants, researchers, doctoral students working at the Belarusian National Technical University, as well as in other educational institutions of the Republic of Belarus. Materials of foreign citizens can be published in the collection if there is a cover letter from the rector or vice-rector for science of their university or research institution. The collection can also publish articles of students in collaboration with supervisors.
The article must be accompanied by a document stating the following:
The authors of the article can submit materials to the editorial office on electronic media or send by e-mail tmech@bntu.by , smat@bntu.by , seminar.mechatronics@gmail.com .
Articles received by the editorial board of the collection are considered by the editorial board within a week to determine whether the article complies with the profile of the publication and the requirements for registration.
The editors do not accept articles previously published in other journals or scientific publications. The authors are responsible for the fact that the material has already been published before.
The editors reserve the right to make editorial changes and abbreviations that do not distort the main content of the article.
Articles in the issue are selected from those successfully reviewed and recommended for publication in the order they are received by the editors.
The author's fee for the publication of the article is not paid.
Materials sent to the editors are not returned to the authors.
The editors reserve the right to make changes to the rules for formatting articles in connection with the requirements of the Higher Attestation Commission of the Republic of Belarus and the decisions of the editorial board of the collection.
Review procedure
Articles are reviewed by members of the editorial board, as well as by invited reviewers. External review is carried out by a specialist of the appropriate profile, who has a degree in this field. The choice of an external reviewer is carried out by the editors of the collection. The review procedure is confidential. The reviewers are notified that the manuscripts sent to them are the intellectual property of the authors and are not subject to disclosure. Reviewers are not allowed to make copies of the manuscript for their own needs. The review period is 2-4 weeks, for English-language articles 2 months, but at the request of the reviewer, it can be extended.
The author of the reviewed work is given the opportunity to read the text of the review.
If the review contains recommendations for correcting and refining the article, the editors of the collection send the author the text of the review with a proposal to take them into account when preparing a new version of the article or reasonably refute them. Finalization of the article should not take more than one month from the date of sending an e-mail to the authors about the need to make changes. The article modified by the author is sent to the reviewer for further recommendations.
If the authors refuse to finalize the materials, they must notify the editors in writing or orally of their refusal to publish the article.
The presence of a positive review of the article is not sufficient grounds for publishing the article in the collection. The final decision on publication is made by the editorial board. In conflict situations, the decision is made by the editor-in-chief.
The following articles are not allowed to be published:
The content of the collection is approved by the editor-in-chief.
