Учебные материалы

Educational and methodical publications of the department

1. Tainov A.I. New types of gears. Ed. AN BSSR, Mn., 1960. - 188 p.
2. Theoretical mechanics. Methodical instructions and control tasks for students of the correspondence faculty of non-mechanical specialties. Belarusian Polytechnic Institute named after I.V. Stalin, Minsk, 1960. Compiled by Art. teacher D.A. Aksenovich
3. Machine details in examples and tasks. Under total Ed. S.M.Basheeva. Mn., Higher School, 1970. 488 p.
4. Akulinin V.S. Calculation of elevators. Tasks and guidelines for course design at the PTM course for students of mechanical specialties. BPI, Mn. – 1974. 13 p.
5. Yu.I. Svirshchevsky, I.N. Makeichik. Calculation and design of gearboxes and feeds. Mn., Higher School, 1976. 290 p.
6. Makeichik N.N., Karvatsky A.M. Reference - methodological manual on the system of tolerances and landings for students of engineering specialties. - M., 1978. -113 p.
7. Chernin I.M., Kuzmin A.V., Itskovich G.M. Calculations of machine parts. - Mn.: Vysh. school, 1978.- 472 p.
8. Skoybeda A.T. Automation of running systems of wheeled vehicles. Mn., "Science and technology", 1979, 280 p.
9. Maeychik N.N., Miklashevich A.A. Settlement and graphic works. Methodical aid on the course "Machine parts" for students of the faculty of advanced training. BPI, Mn., 1981. - 68 p.
10. Machine parts in examples and tasks: Proc. allowance / S.N. Nichiporchik, M.I. Korzhentsevsky, V.F. Kalachev and others: under the general. ed. S.N. Nichiporchik. - Mn.: Vysh. school, 1981.-432 p.
11. Course design of machine parts: Ref. allowance. Part 1 / A.V. Kuzmin, N.N. Makeichik, V.F. Kalachev and others]. Mn.: Vysh. school, 1982. - 208 p., ill.
12. Course design of machine parts: Ref. allowance. Part 2 / A.V. Kuzmin, N.N. Makeichik, V.F. Kalachev and others]. Mn.: Vysh. school, 1982. - 334 p., ill.
13. Skoybeda A.T. Design and calculation of planetary and differential mechanisms. - Mn., 1983. - 32 p.
14. Skoybeda A.T., Makeichik N.N. Kinematic and strength calculations of planetary gears. - Mn., 1983. - 31 p.
15. Loading of transmissions of wheeled vehicles. Ed. A.T. Skoybedy. Ostroverkhov N.L. Ksendzov V.N. Minsk: Science and technology, 1983
16. Skoybeda A.T., Nikolaev A.D. Mechanical drive design. - Mn., 1984. -30 p.
17. Kuzmin A.V., Chernin I.M., Kozintsev B.S. Calculations of machine parts: Sprav, allowance. - Mn.: Vysh. school, 1986. - 400s.
18. Ensuring the resource of spring suspensions. Ed. A.T. Skoybedy. Rakitsky A.A., Bernatsky A.K. Minsk: Science and technology, 1988
19. Clutch for precessional gears. Ed. A.T. Skoybedy. Bostan I.A. and others. Chisinau, Shtiitsa, 1988
20. Skoybeda A.T., Komyak I.M. Progressive directions of development of designs of brake mechanisms. Minsk: BelNIINTI, 1988
21. Skoybeda A.T., Kalina A.A. Technical level and type of forage harvesters. Minsk: BelNIINTI, 1990
22. Skoybeda A.T., Komyak I.M. Trends in the development of brake drives and increasing their reliability. Minsk: BelNIINTI, 1990
23. Berestnev O.V., Goman A.M., Ishin N.N. Analytical methods of mechanics in the dynamics of drives. - Minsk: Navuka i tehnika, 1992. - 238 p.
24. Berestnev O.V., Zhuk I.V., Nedelkin A.N. Gears with increased tooth flexibility. - Minsk: Navuka i tehnika, 1993. - 183 p.
25. Mechanikateoretycznaipodstawyteoriimechanizmowirobotow, volume 1: Historiamechanikiikinematyka. Skoybeda A.T., Yakovlyuk A.N., Levkovsky E.N., Karpovich S.E. Poland, 1993
26. Skoybeda A.T. Mechanikateoretycznaipodstawyteoriimechanizmowirobotow, volume 2: Dynamika. Poland, 1993
27. Skoybeda A.T. Mechanikateoretycznaipodstawyteoriimechanizmowirobotow, volume 3: mechanikaanalityczna, dynamikamaszynirobotow. Poland, 1993
28. Bondarenko A.G., Shavel A.A. Calculation of spur gears with displacement using a PC: Method. allowance for students. tech. universities. - Minsk: BSPA, 1994. - 23 p.
29. Skoybeda A.T., Nikonchuk A.N. Belt drives. - Minsk: Science and technology, 1995 -383 p.
30. Applied mechanics: Proc. allowance / A.T. Skoybeda, A.A. Miklashevich, E.N. Levkovsky and others. Under the general. ed. A.T. Skoybeds. - Mn.: Vysh. school, 1997. - 522 p.
31. Skoybeda A.T., Ikowluk A., KarpovichE.,Levkovsky E. Algorithmization of mathematical models for non-holonomic constrains system. Bialystok, Poland, 1998.
32. Skoybeda A.T., Dankov A.M. Transmission mechanisms based on composite gears. Minsk: BSPA, 2000. - 96 p.
33. Skoybeda A.T., Kuzmin A.V., Makeichik N.N. Machine parts and design basics: textbook. - Mn. Higher school, 2000; 2006. - 584 p.
34. Planetary gears. Ed. Skoybedy A.T. Gromyko P.N., Zholobov A.A. Mn.: BGPA. - 2000
35. Kurmaz L.V., Skoybeda A.T. Machine parts. Design. Minsk: Technoprint, 2001; 2002; 2004; 2005. - 309 p.
36. Skoybeda A.T., Gromyko P.N. Bevel-cylindrical precession gearboxes. - Mn., 2001. - 187 p.
37. Dynamic regulation of the modes of motion of all-wheel drive vehicles. Ed. Skoybedy A.T. Sazonov I.S.Mn., BSPA.- 2001
38. Cabbage P.P. Probabilistic evaluation of fatigue resistance characteristics of parts at the design stage of machines. Educational and methodical manual for higher educational institutions. - Minsk.: UE "Technoprint", 2001. - 97 p.
39. Nikolaenko V.L., Shpilevsky V.I., Birich V.V., Kalina A.A., Anokhin A.M. Applied mechanics. Course design: Textbook. - Minsk: BSPA, 2001. - 107 p.
40. Kalina A.A. Fundamentals of interchangeability and technical measurements: Method, manual for laboratory and practical work in the discipline "Applied Mechanics". Ed. A.T. Skoybeds. - Minsk: BNTU, 2002. - 22 p.
41. Kim I.P., Kalina A.A. Permanent connections. Method, a guide to solving problems on diss. "Machine parts". - Minsk: BNTU, 2003. - 88 p.
42. Bakhanovich A.G. Design of toothed belt drives / BNTU. - Minsk, 2004.-39 p.
43. Bakhanovich A.G. Designing belt drives: Educational method. allowance. - Minsk: BNTU, 2004. - 58 p.
44. Tiliguzov G.V. Abstract of lectures on the course "Diagnostics of machines and devices" for students of engineering specialties (special course). Minsk: BSPA, department "Machine parts, PTM and M", 2004. 90 p.
45. Bakhanovich A.G., Skoybeda A.T. Tooth-belt transmissions: monograph. - Minsk: BNTU, 2005.-364s.
46. Tiliguzov G.V., Shpilevsky V.I. Abstract of lectures on the training program "Loading cranes. Rules for the design and safe operation" for the training of workers in industrial enterprises and institutions. Minsk: BSPA, department "Machine parts, PTM and M", 2005. 45 p.
47. Tiliguzov G.V., Shpilevsky V.I. Abstract of lectures on the training program "Lifts and towers. Rules for the design and safe operation" for the training of workers in industrial enterprises and institutions. Minsk: BSPA, department "Machine parts, PTM and M", 2006. 40 p.
48. Dynamics of wheeled vehicles: monograph / I.S. Sazonov [i dr.]. - Mogilev: Belorus.-Ros.un-t, 2006. - 462 p.: ill. (with the participation of Skoybeda A.T.)
49. Pro/ENGINEER Wildfire. Details and units of general purpose. Vysotsky M.S., Algin V.B., Kalina A.A. etc. Educational - methodical manual. Minsk, BNTU, 2006. 76 p.
50. Machine parts. Course design. Guidelines for the design of the explanatory note of the course project (work). Compiled by: Skoybeda A.T., Anokhin V.M., Bondarenko A.G., Nikolaenko V.L., Statkevich A.M. Mn., BNTU, 2007. - 84 p.
51. Nikolaenko V.L. Mechanics: textbook. At 2 o'clock - Minsk: BNTU, 2007. -267 p.
52. Bakhanovich A.G. . Theory and practice of gear-belt transmissions: monograph. Minsk: BNTU, 2008. - 209 p.
53. Machine parts: laboratory work / comp.: A.T. Skoybed [and others]; ed. A.T. Skoybeds. - Minsk: BNTU, 2008. - 136 p.
54. Fundamentals of designing machines and devices: a teaching aid for problem solving. At 2 h. Part 1. Mechanics of materials / N.N. Rozanova, I.M. Komyak, V.I. Shpilevsky, V.D. Cornflower; ed. A.T. Skoybeds. - Minsk: BNTU, 2008. - 120 p.
55. Fundamentals of designing machines and devices: a teaching aid for problem solving. At 2 o'clock Part 2. Theory of mechanisms, machines and devices / V.D. Vasilenok, N.N. Rozanova, I.M. Komyak; ed. A.T. Skoybeds. - Minsk: BNTU, 2008. - 48 p.
56. Skoybeda A.T. Design and calculation of mechanical couplings: Methodological guide for students of engineering specialties / A.T. Skoybeda, V.M.Anokhin, A.M. Statkevich, V.L. Nikolaenko, V.M. Shpilevsky. - Minsk: BNTU, 2008. - 59 p.
57. Perspective materials and technologies: collective monograph / Ed. ed. V.V. Klubovich. Klubovich V.V., Skoibida A.T., Bakhanovich A.G., Tomilo V.A. and others. Vitebsk: Publishing House of UO "VGTU", 2008-512p.
58. Anokhina L.S. Dynamic Analysis of Lever Mechanisms: A Methodological Guide. Ed. A.T. Skoybeds. - Minsk: BNTU, 2010. - 91 p.
59. Applied mechanics: course design: textbook / V.L. Nikolaenko and others; ed. A.T. Skoybedy. - Minsk: BNTU, 2010. -177 p.
60. Nikolaenko V.L. Applied mechanics. Calculation of typical structural elements: a tutorial. - Minsk: Grevtsov Publishing House, 2010. - 386 p.
61. Anokhin V.M., Birich V.V., Statkevich A.M. The procedure for the selection and calculation of rolling bearings: guidelines. - Minsk: BNTU, 2010. - 88 p.
62. Kim I.P., Kalina A.A. Permanent connections. Tension connections. Educational - methodical manual for problem solving. Electronic edition of BNTU / MSF 27-1.2010 6 arb. electr. sheets.
63. Nikolaenko V.L. Mechanics: teaching aid for students of non-engineering specialties of universities. - Minsk: BNTU, 2011. - 294 p.
64. Skoybeda A.T. Hydromechanical transmission of mobile machines. Design and diagnostics / A.T. Skoybeda, S.A. Rynkevich. – Mogilev: UPKP “Mogilev. region ukrup. printer. them. S. Sobolya”, 2014. – 230 p.: ill.
65. Skoybeda A.T., Ageichik V.A., Kononovich I.N. Machine parts. Theory and calculation: educational - methodical manual. Minsk, BGATU, 2014, 372 p.
66. Skoybeda A.T., Statkevich A.M., Kalina A.A. Design of mechanical transmissions. Draft project: methodical manual. Minsk, BNTU, 2014, 112 p
67. Filonov I.P., Antsiporovich P.P., Akulich V.K. Theory of mechanisms, machines and manipulators. - Minsk: Design PRO, 1998. - 656 p.
    
68. Artobolevsky, I.I. Theory of mechanisms and machines / I.I. Artobolevsky. - 4th ed. – M.: Nauka, 1988. – 640 p.
69. Artobolevsky, I.I. Collection of problems on the theory of mechanisms and machines / I.I. Artobolevsky, B. V. Edelshtein. - 2nd ed. – M.: Nauka, 1975. – 256 p. Levitsky, N.I. Theory of mechanisms and machines / N.I. Levitsky. - 2nd ed. – M.: Nauka, 1990. – 592 p.
70. Levitskaya, O.N. The course of the theory of mechanisms and machines / O.N. Leviticus. - 2nd ed. - M.: Higher school, 1985. - 279 p.
71. Popov, S.A. Course design on the theory of mechanisms and machines./ S.A. Popov, G. A. Timofeev - 4th ed. - M.: Higher school, 2002. - 411 p.
72. Theory of mechanisms and mechanics of machines / K. V. Frolov [and others]; edited by K. V. Frolov. – 5th ed. - M.: Higher school, 2005. - 496 p.
73. Yudin, V.A. Theory of mechanisms and machines / V.A. Yudin, L. V. Petrokas. - 2nd ed. - M.: Higher School, 1977. - 527 p.
74. Course design on the theory of mechanisms and machines / V.K. Akulich [and others] gen. ed. G.N. Devoino. - Minsk: Higher School, 1986. - 286 p.
75. Laboratory work on the theory of mechanisms and machines / E.A. Kamtsev [and others]; under the general editorship of E.A. Kamtsev. - Minsk: Higher School, 1976. - 174 p.
76. Antsiporovich, P.P. Dynamics of the machine unit: a methodological guide for part-time students of engineering specialties / P.P. Antsiporovich, V.K. Akulich, E.M. Dubovskaya. - 2nd ed., Rev. and additional - Minsk: BNTU, 2017. - 33 p.
    The manual is a text of lectures on one of the main sections of the discipline "Theory of mechanisms and machines". A technique for compiling a dynamic model of machines and determining the law of motion is considered. Recommended for part-time students of engineering specialties.
77. Antsiporovich, P.P. Dynamic analysis of mechanisms: a manual for students of engineering specialties / P.P. Antsiporovich, V.K. Akulich, E.M. Dubovskaya. - 2nd ed., erased. - Minsk: BNTU, 2017. - 31 p.
    The manual is a text of lectures on one of the main sections of the course "Theory of mechanisms and machines." The features of determination of reactive loads in kinematic pairs of flat lever mechanisms by the kinetostatic method are considered. Recommended for part-time students of engineering specialties.
78. Antsiporovich, P.P. Theory of mechanisms, machines and manipulators. Kinematics: a guide for students spec. 1-36 01 01 "Technology of mechanical engineering", 1 - 36 01 03 "Technological equipment of machine-building production" / P.P. Antsiporovich, V.K. Akulich, E.M. Dubovskaya. - Minsk: BNTU, 2017. - 36 p.
    The manual is a text of lectures on one of the main sections of the discipline "Theory of mechanisms and machines". The technique of performing the kinematic analysis of lever mechanisms by the method of plans and the analytical method is considered. Recommended for part-time students of engineering specialties.
79. Theory of mechanisms, machines and manipulators: Course design: Educational and methodological manual for part-time students of engineering specialties / P.P. Antsiporovich [i dr.]. - Minsk: BNTU, 2018. - 68 p.
    The teaching aid is a guide to the implementation of the course project in the discipline "Theory of mechanisms, machines and manipulators". The features of solving problems of the dynamics of machines and mechanisms, the synthesis of cam mechanisms are shown. Recommended for part-time students of mechanical engineering specialties.
80. Theory of mechanisms, machines and manipulators: a manual for students of specialties 1-36 01 01 "Technology of mechanical engineering" and 1-36 01 03 "Technological equipment of machine-building production" / P.P. Antsiporovich, V.K. Akulich, E.M. Dubovskaya. - Minsk: BNTU, 2018. - 56 p.
    The manual contains the program of the course "Theory of Mechanisms, Machines and Manipulators", a list of recommended literature, assignments for course design, features of the choice of examinations and topics of course projects. Designed for students of mechanical specialties.
81. Antsiporovich, P.P. Synthesis of crank-slider mechanisms / P.P. Antsiporovich, V.K. Akulich, E.M. Dubovskaya. - Minsk: BNTU, 2006. - 22 p.
    The manual discusses the main geometric characteristics of the crank-slider mechanisms, their impact on the quality of the machine. Examples of the synthesis of mechanisms are given. Recommended for mechanical students.
82. Dynamics of machines and mechanisms in the steady state of motion: Educational and methodological manual for course design in the discipline "Theory of mechanisms, machines and manipulators" / P.P. Antsiporovich, V.K. Akulich, E.M. Dubovskaya. - 2nd ed., erased. - Minsk: BNTU, 2014. - 44 p.
    The manual deals with the main tasks of the dynamic study of machines and mechanisms in a steady state of motion, solved in the course of a course project on the theory of mechanisms, machines and manipulators by students of engineering and technical specialties of universities. The technique is based on the use of analytical methods. Much attention is paid to the mathematical algorithmization of the problems being solved for the purpose of their subsequent programming.
83. Synthesis of cam mechanisms: teaching aid for course design in the discipline "Theory of mechanisms, machines and manipulators" / P.P. Antsiporovich [i dr.]. - 4th ed., Rev. - Minsk: BNTU, 2013. - 80 p.
    The publication includes the section "Synthesis of cam mechanisms" of the course project on the discipline "Theory of mechanisms, machines and manipulators". The description of the main stages of the synthesis of cam mechanisms using the program "Synthesis of cam mechanisms" is given. The user manual of the program, recommendations for the preparation of initial data are included, the features of the dialogue with the program are outlined. Examples of the synthesis of mechanisms using a computer and the procedure for performing computational and graphic work are given. Recommended for students of engineering and technical specialties.
84. Theory of mechanisms and machines: a methodological guide for course design for students of engineering and technical specialties / P.P. Antsiporovich, V.K. Akulich, E.M. Dubovskaya – Ed. 4th, rev. - Minsk: BNTU, 2014. - 58 p.
    The methodological manual is a guide to the implementation of a course project in the discipline "Theory of mechanisms and machines", the design of an explanatory note and a graphic part. The features of solving problems on the dynamics of machines and mechanisms, the synthesis of cam mechanisms are shown.
85. The structure of mechanisms: a teaching aid for laboratory work on the discipline "Theory of mechanisms, machines and manipulators" / P.P. Antsiporovich, V.K. Akulich, E.M. Dubovskaya - 2nd ed. - Minsk: BNTU, 2015. - 33 p.
    The educational and methodical manual provides for the implementation of two laboratory works "Symbols and structural and constructive classification of mechanisms" and "Structural analysis of mechanisms". Each work contains a theoretical part, a description of laboratory work and control questions. Recommended for students of engineering and technical specialties.
86. Kinematics of gear mechanisms: teaching aid for laboratory work on the discipline "Theory of mechanisms, machines and manipulators" / P.P. Antsiporovich [i dr.]. - 4th ed. - Minsk: BNTU, 2016. - 26 p.
    The publication includes the section "Kinematic analysis of gear mechanisms" of the discipline "Theory of mechanisms, machines and manipulators". It is planned to perform laboratory work "Diagramming and kinematic analysis of gear mechanisms". Contains a theoretical part, a description of laboratory work and control questions. Recommended for students of engineering and technical specialties.
87. Balancing rotating masses: teaching aid for laboratory work on the discipline "Theory of mechanisms, machines and manipulators" / P.P. Antsiporovich, V.V. Kudin, E.M. Dubovskaya. - Minsk: BNTU, 2013. - 27 p.
    The publication includes the section "Balancing of rotating masses" of the discipline "Theory of mechanisms, machines and manipulators". It is planned to perform the laboratory work "Balancing of rotating masses". Contains a theoretical part, a description of laboratory work and control questions. Recommended for students of engineering and technical specialties.
88. Antsiporovich, P.P. Experimental methods for studying the movement of mechanisms: a manual for laboratory work on the discipline "Theory of mechanisms, machines and manipulators" / P.P. Antsiporovich, V.K. Akulich, E.M. Dubovskaya. - Minsk: BNTU, 2012. - 28 p.
    The publication includes the section "Experimental methods for studying the kinematic parameters of machines" of the discipline "Theory of mechanisms, machines and manipulators". The laboratory work "Experimental methods for studying the movement of mechanisms" is envisaged. Contains a theoretical part, a description of laboratory work and control questions. Recommended for engineering students.
89. Cutting cylindrical involute gears and building a gearing scheme: a teaching aid for laboratory work on the discipline “Theory of mechanisms, machines and manipulators / P.P. Antsiporovich, V.K. Akulich, E.M. Dubovskaya. - 5th ed., - Minsk: BNTU, 2015. - 46 p.
    The manual is a laboratory workshop on the section "Synthesis of flat gears" of the course "Theory of mechanisms, machines and manipulators". It is planned to perform two laboratory works - "Construction of the teeth of an involute profile by the running method" and "Involute engagement of spur gears". Each work contains a theoretical part, a description of laboratory work and control questions. Recommended for students of engineering and technical specialties.
90. Kudin V.V., Astakhov E.I. Oscillations in machines and methods for their elimination: A teaching aid for students of engineering specialties. - Minsk: BSPA, 1997. - 130 p.
91. Oscillations in machines: laboratory work for students of specialties 1-36 01 01 "Technology of mechanical engineering" and 1-36 01 03 "Technological equipment of machine-building production" / Comp.: E.I. Astakhov, V.V. Kudin, M.V. Kudin. - Minsk: BNTU, 2005 - 95 p.
92. Modeling of oscillatory processes in machines. Determination of vibration isolation parameters: a manual for laboratory work / V.V. Kudin [i dr.]. - Minsk: BNTU, 2015 - 38 p.
    The methodological manual describes the schemes of vibration isolation of machines under force and kinematic disturbances, the calculation of vibration isolation parameters and criteria for its effectiveness are given. The publication is intended for students of engineering and technical specialties of universities in the discipline "Oscillations in machines", and can also be used for individual works in the training courses "Theory of mechanisms and machines", "Dynamics of machines" and other related disciplines.
93. Modeling of oscillatory processes in machines. Parametric oscillations, self-oscillations: laboratory workshop on the discipline "Oscillations in machines" for students of mechanical engineering specialties / compiled by V.V. Kudin, E.I. Astakhov, A.M. Avsievich - Minsk: BNTU, 2017 - 26 p.
    Contains methods of mathematical, computer and laboratory modeling of a mechanical system with parametric and frictional self-oscillations. Each work provides brief theoretical information, the procedure for mathematical modeling, a description of the laboratory setup, the order of execution, the content of the report on the laboratory work, control questions on topics. The publication is intended for students of engineering and technical specialties of universities in the discipline "Oscillations in machines".
94. Informatics. Course design: method. allowance / P.P. Antsiporovich [i dr.]. - Minsk: BNTU, 2006. - 84 p.
    The manual is intended for engineering students studying the course "Informatics". Contains guidelines and assignments for the course work.
95. 96. Computer science. Test papers and course design: A methodological guide for part-time students of engineering specialties / N.Ya. Lutsko, P.P. Antsiporovich, T.I. Bulgak. - 3rd ed., Rev. and additional - Minsk: BNTU, 2007. - 70 p.
    The developed methodological manual is intended for part-time students of engineering specialties studying the course "Informatics". The manual contains the main theoretical provisions, guidelines and assignments for performing control and term papers, as well as examples of their implementation.
96. OS Windows. Text processor Word: a manual for the implementation of laboratory work in the discipline "Informatics" / P.P. Antsiporovich, O.I. Aleinikova, N.Ya. Lutsko. - Minsk.: BNTU, 2010. - 27 p.
    The publication includes the section "Word word processor" of the discipline "Informatics". It is planned to perform four laboratory works. Each work is built in the form of a sequence of actions, by performing which the student masters and consolidates the technologies of the Word processor. Recommended for students of engineering and technical specialties.
97. Excel spreadsheets: laboratory work in the discipline "Informatics" / P.P. Antsiporovich, O.I. Aleinikova, N.Ya. Lutsko. - Minsk: BNTU, 2010. - 29 p.
    The publication includes the section "Excel spreadsheets" of the discipline "Informatics". There are three labs to be performed. Each work is built in the form of a sequence of actions, performing which the student masters and consolidates Excel spreadsheet technologies and acquires the skills to use them to solve technical problems. Recommended for students of engineering and technical specialties.
98. Informatics. Programming in Pascal: a methodological guide for performing laboratory work in the discipline "Computer Science": in 2 hours. / P.P. Antsiporovich, O.I. Aleinikova, N.Ya. Lutsko. - Minsk: BNTU, 2011. - Part 1. - 59 p.
    The publication includes the section "Programming in Pascal" of the discipline "Informatics". Theoretical information on the subject of laboratory work is presented; examples of the execution of typical tasks are given, including problem statements, algorithm schemes and program texts; tasks are presented for execution. Recommended for students of engineering and technical specialties.
99. Informatics. Programming in Pascal: a methodological guide for performing laboratory work in the discipline "Computer Science": in 2 hours. / P.P. Antsiporovich, O.I. Aleinikova, N.Ya. Lutsko. - Minsk: BNTU, 2012. - Part 2. - 50 p.
100. Machine parts: an educational and methodical manual for students of mechanical engineering specialties: in 3 hours / A.T. Skoybeda, etc.; under the general editorship of A.T. Skoybeda. – Minsk: BNTU, 2019. – Part 1: Mechanical transmissions - 2019. – 215 p.
101. Machine parts: educational and methodical manual for students of specialties 1-36 01 01 "Technology of mechanical engineering" and 1-36 01 03 "Technological equipment of machine-building production": in 3 hours/A.T. Skoybeda et al.– Minsk: BNTU, 2019. – Ch. 2: Connections of machine parts - 2022. – 179 p.

In addition to the above, the staff of the department systematically publishes methodological manuals and instructions for coursework, laboratory, calculation and graphic work on the subjects of the specialties taught at the department.